Tag Archives: McCalls 7542

The pattern that kept on morphing and other stories: Make A Garment A Month (MAGAM) sewalong

This is the story of a dress that became a bolero that became a sweater that became a cardigan. I’m no good at building suspense, so I’m going to jump right in with the finished result, and then give you its “origin story”!!

I don’t know which I love more: the cardigan, or the autumn colours in the garden!

Not long after I opened my Instagram account back in the Springtime, I noticed a challenge called MAGAM (Make A Garment A Month), hosted by Sarah Liz. The idea behind MAGAM is to provide a monthly theme that participants take as inspiration: it seemed a lovely supportive way to foster slow sewing by focusing on one garment every month, so I finally took the plunge and joined in for September.

Happily for me, the September theme was Shirty Skirty” (make a shirt or a skirt). This is non-UK use of “shirt”, i.e. any kind of top (I don’t often wear what I would call a shirt, which elsewhere would be called a button-down, so the language slippage suited me well). So I eased myself into MAGAM with the McCalls M7542 pattern from Sew Now magazine, using a rayon jersey and following my own tutorial for adapting it to a knit fabric. Well, I say “following my own tutorial”, but I didn’t really – I thought I could remember it so I went ahead and kept only the original instructions in front of me, which meant I attached the sleeves as if it were a woven! A bout of unpicking later, I returned to my tutorial with my head hanging in shame, and the rest went swimmingly.

My first MAGAM entry

The theme for October was more challenging: “Original October”. I mulled this one over for a good while. It did coincide with the development of our next pattern, which is obviously an original design, but it seemed too simple just to say “well I’ll make up one of our new dresses”.

First sneak peek of the forthcoming dress pattern!

However, the #cosycardichallenge was in full swing and for a while now I’ve wanted a lightweight fitted cardigan to wear over sleeveless dresses and extend their wearable life into autumn, and so I decided to adapt the dress pattern to become a cropped/ bolero cardigan. I did this without too much difficulty, just cutting off the pattern pieces of the scoop-neck version under the bust and drawing in a curve, but when I came to try it on I realised it would only really go with empire line dresses (it’s pictured here with my refashioned silk skirt) – with anything else it just sort of looked like I’d run out of fabric.

One of only two dresses I can wear this with!

Back to the drafting software (with my trusty sidekick aka technical department aka Rich beside me) and we went for a hip-length slightly flared look, with a high-low hem and a higher neckline. I started off by trying out the design as a sweater to test the shape before drafting the front placket, and I loved it (fully aided by the fact that I sewed it up in the softest jacquard ever, given to me as a birthday gift).

That’s more like it!

So I was ready to try it out as a cardigan, but not *quite* ready to cut into the beautiful jacquard from Lillestoff that I had earmarked for the project. My interim make was from a lovely floral French terry from Raspberry Creek Fabrics that I’ve been hoarding for a year now, and I liked the shape of the result BUT… ugh, well, it was just the wrong combination of fabric and style. I went for a scoop neck and standard hem, and the finished result reminds me of a housecoat or something.

You’ve got to love taking photos on a windy day!

I love the fabric, but this wasn’t the right project for it. I’ll see if I wear it, and if not I’ll scale it down into something for my daughter. And another reason to be glad I made this first version before cutting into my jacquard: I had ordered some interfacing online and the quality was just terrible. It didn’t move with the fabric at all, and if you look closely it has caused a couple of ripples in the front placket. Not the end of the world, but I would have been sad if that had been my precious jacquard.

So for the final version I decided to combine the higher neckline and the high-low hem, bought some more interfacing (never again will I stray from the goodness that is Vilene) and off I went…

The finished cardigan, origin story complete

I love this cardigan so much. Re-drafting was a good idea, as instead of just “chopping off” the dress pattern, we created an new line for this length, and it works much better. In particular, I really enjoyed thinking about the construction process, and how to make all the finishings look professional. I do love a garment that looks as pretty on the inside as it does on the outside!

Close-ups of the details: front placket, high-low hem, hem meeting facing, and inside the placket.

I used KAM snaps for the closures – I had always previously used the kind of snaps that you have to hammer on, but I was convinced by Sarah’s evangelising about the joy of attaching snaps with pliers and now I want to put KAM snaps on EVERYTHING!!!

In the end I think this particular version works better with jeans as the small pattern on the fabric means it doesn’t really go with a lot of my patterned dresses. But that could just be me falling back into my comfort zone, as jeans are basically my uniform! But it still goes well with these two sleeveless dresses:

Action shots (by which I mean “walking slowly towards the camera”). I like to photograph the movement of a garment so I can see how it looks when I’m not just standing facing a mirror!

The left one is a Deer and Doe sleeveless aubépine, and the right one is a maxi Dune from our own collection. The cardigan definitely helps both of these summer dresses transition into autumn. So either I need more solid dresses, or I need to make more cardigans in solid colours. Or both!!! And you know me by now, I don’t need much of an excuse to make a new garment…

So I’m really happy to be part of MAGAM, and I’m looking forward to the November challenge. As long as it’s not “sew a coat inspired by a classic French film”, because, you know, why do that to myself twice in one year?!!

In other news, encouraged by my lovely friend Diane, I’m trying to get my head round Pinterest at the moment, though it hasn’t synced to our site yet and I have yet to create any boards beyond this one image! But here is (I think?!) a link to my Pinterest page, which hopefully I shall work on soon! So if you have a Pinterest account do come and befriend me as I am LOST over there!

What about you? Have you joined MAGAM or the cosy cardi challenge? Any favourite makes/ stories to share? What about Pinterest? How do you use it efficiently and am I truly the last to join the party?!

Sewing McCalls 7542 in a knit fabric for Sleevefest

A while before Diane and I started thinking about the Sleevefest sewing challenge, I had noticed this McCall’s pattern cropping up on Instagram – M7542 is a fitted top with five statement sleeve options. About half-way through Sleevefest, Sew Now magazine included it as a free pattern in their August issue, and so I got the pattern to make up in honour of Sleevefest!

The pattern is for woven fabrics: it has bust darts at the front and neck darts at the back, and these give the top a semi-fitted shape. The back is finished with a small placket and a hook and eye closure at the neckline. Four of the five sleeve options come from a short fitted sleeve that is embellished with a pleated, gathered, bubble or trumpet cuff. The first three come to the elbow, the trumpet cuff is asymmetrical and drapes to the wrist on the inner arm. Then the fifth option is a tulip-style crossover sleeve that also ends at the elbow.

I love love love the dramatic trumpet sleeve (view B), and that’s the one I thought I’d make, BUT I did want a top I could wear in my everyday life, and so I decided to start with my second favourite, the tulip sleeve (view A).

Look at that sleeve-y goodness!

You know what’s coming next. This pattern is for wovens, and I love sewing with knits. Although I had mentally earmarked a gorgeous eyelet fabric I have in my stash, I was looking at the pattern and I thought that actually the shape of the bodice wasn’t going to do me any favours. This top really is all about the sleeve, but if I was going to get wear out of it, I had to feel good in it. Sooooo… I decided to adapt the pattern for use with a knit fabric.

This will work for pretty much any woven top, so here’s what I did:

First, I decided on my size. The size charts put me as a UK 10 for the bust and a 10-12 for the waist and hips. Although making the pattern in a knit would usually mean that I’d go down a size, in my head I had already envisaged this being loose and floaty, so I kept to those sizes and graded from a size 10 to a 12 at the waist. I have already learned that McCalls patterns tend to come up big on me – remember my M7574 dress? – but I thought I’d just go for it as I was aiming for an oversized look. I’d already ordered this dreamy slub viscose jersey from Minerva Crafts, and it was begging to be made into a floaty top. Also, when it arrived I found that it’s a little see-through, so I couldn’t risk the top being too tight as I didn’t want my bra to show through!

Gratuitous sleeve poses

So, onto the modifications. The first thing to do is to remove the darts – you just don’t need them in a knit unless you have a much more impressive chest than I do. This is a simple alteration to make, illustrated below: you find the point of the bust dart in your size, and then draw a straight vertical line from here to the hem. Then cut this line from the hem upwards. Then cut along ONE of the lines of the bust dart, towards the point of the dart. You’ll end up with a piece cut out of your pattern: tilt this upwards until the line of the bust dart you have cut meets exactly with the uncut line. Tape this in place. You have now created a lovely slash and spread which will give you a nice floaty garment! Tape some pattern tracing paper to the back of your pattern to fill in the gap, and use a French curve to join up the hem in the space you have created.

Remove the back darts in the same way. For this top, it makes the back slightly more flared than the front, but I liked the idea of a swingy back so I didn’t do any further modifications to the shape in that respect. However, since the pattern piece for the back has a shaped centre seam to enhance the fit, I needed to take that out for my floaty top and create a back bodice piece that could be cut on the fold. This is super-simple: I just measured in the 5/8” seam allowance at the neckline, and drew a straight line down to the hem, parallel to the grainline arrow. I then cut along this line and marked the new pattern piece to be cut on the fold.

There are no modifications to be made to the sleeve pieces, only to the way you sew up the sleeves. Basically, the top can now be sewn like any other t-shirt, with a bit of special attention to the tulip sleeves. I used an overlocker for all my seams, but keep in mind that you need to use a 5/8” seam rather than the 3/8” you would normally use for knits, as the pattern is designed for wovens. I also decided to do rolled hems for my finishings, to enhance the floaty look.

Floatiness in action with some “walking towards camera” shots

So, here’s how I did it:

  1. Attach the front to the back at the shoulders, and press the seam to the back.
  2. Finish the neckline (I used a rolled hem, but you could press under and hem with a twin needle or coverstitch machine, or draft a neckband).
  3. Hem the sleeve front and back pieces. I used a narrow rolled hem on my overlocker, giving a lettuce effect to the hems.
  4. Baste the back sleeve pieces onto the front sleeve pieces as indicated in the instructions (step 14), aligning the large circle marking on each piece. DO NOT sew the sleeve seams as directed in the instructions (step 12): this instruction is for set-in sleeves, and with this knit fabric modification we can sew the sleeve seam at the same time as the side seam.

    Omit step 12; you’ve already done step 13; do step 14!

  5. Pin the sleeves to the armscyes, right sides together. Align the large circle with the shoulder seam and the underarm edges of the bodice and sleeve. Ease the sleeve into the armscye, pinning every inch or so.
  6. Sew the sleeve to the bodice, and press the seam towards the sleeve.
  7. Pin the side seams, right sides together: pin at the underarm seam, the bodice hem and the sleeve hem, and then line up the seams, pinning every inch or so.
  8. At this point, I recommend basting the sleeve hem. Since you’ve done a rolled hem, you won’t be turning up the sleeve hem again, and so you want the edges of your sleeve to align nicely at the seam. Using a regular sewing machine and a long straight stitch, baste together from the hem edge downwards – just an inch or two will suffice.
  9. Sew the side seams from the bottom of the bodice hem all the way up to the sleeve hem. Remove your basting stitches.

Ta-daaa!! Beautifully aligned seams, thanks to the basting.

At this point I tried on my top, and I wasn’t too keen on the neckline. It’s quite a high neckline, and because I’d done the rolled hem, it stood a bit proud from my shoulders, a bit like a mini ruff!

Awkward tilted head pose, trying to show how the neckline looks!

I played around with a few ideas and ALMOST went with boat neck, but I thought a soft v neck would look perfect with the lines of those tulip sleeves, and with the rolled hem would create an almost scalloped effect. So I went back to my pattern pieces and traced the neckline I wanted onto them, then carefully folded my top in half, creating centre fold lines at the front and back, and pinned the pattern pieces back onto the bodice before cutting along my new necklines and doing a new rolled hem.

New neckline, same awkward head tilt. Ignore my frown lines – I promise I do love this top!

I recommend doing this stage MUCH earlier – i.e. when you’re prepping your pattern pieces! Anyway, only one more stage to go:

  1. Hem the bottom of the garment – I used a rolled hem again, to be in keeping with the rest of my top.

That’s it! A whole new way to sew this already versatile pattern. Plus, once you’ve done all the modifications to your pattern pieces, this is a super-quick sew! How long do you think it’ll be before I do it with that AMAZING trumpet sleeve?! This is a fabulous top to wear with jeans (in these photos I’m wearing one of my pairs of Ginger jeans), and it feels so comfortable but yet is a bit more special than a regular t-shirt. When I put it on for this photo shoot, I couldn’t help remembering a time when I lived in Paris and would treat myself to coffee and cake at a smart salon de thé, and the ladies there always looked so expensive. I remember thinking I could never look like that, whatever clothes or makeup I wore… and when I put this outfit on, I felt like those ladies! The irony is that the denim for my jeans was a remnant at around £7, and the fabric for my top cost £3.99! Who knew “expensive” could be so cheap 😉

Have I mentioned how much I love this look?

For more gorgeous sleeves, including some wonderful variations on this pattern, check out the #sleevefest2017 hashtag on Instagram! And to find out more about how Sew Now magazine styled this pattern for their August issue, click here.

OK OK, last photo I promise!

Till next time, happy sewing!