Tag Archives: Scrapbusting

SCRAPBUSTERS: A trio of Ballerinas and a duo of nameless panties

Here’s a random fact about me: I hate waste. I have a horror of landfill, and although I am nowhere near eco-warrior status, I am all too aware of the dangers of the “disposable” trend that seems to be the norm these days. I think that one of the great things about sewing is that we are more likely to make garments we love and will use, but what about all the leftover bits of fabric that end up languishing in a storage box, or the garments that hang in the wardrobe, unloved and unworn? If you read my post about my sewing resolutions for 2018, you might remember that I said I wanted to make use of things I already have rather than buying more. Well, when I made a recent version of Jenny Hellström’s Ballerina top, I remembered how narrow the pattern pieces are (because it’s such a slim fit top), making it perfect for using up remnants. My love for this pattern knows no bounds, so today I want to show you three scrapbusting modifications I made to it to use up my remnants, including one epic rescue mission.

Three, you say? But what about that “slow sewing” resolution from only a week ago? Fear not, the makes in this post were sewn bit by bit over the last two months, but all blogged together as they’re quite similar!

My standard “no good at building up suspense” opening pic

The first pieces of leftover fabric were this Girl Charlee floral, which I had left over from my GBSB Dune dress. Because the maxi dress pattern pieces are so much wider at the bottom than at the top, there are decent-sized chunks of fabric left over beside the bodice part after cutting out; they’re wide enough to cut sleeves from, and they’re also just big enough to accommodate the bodice pieces of a Ballerina top! I’d already used some of the remnants of this fabric to make a top for my daughter, so I was quite limited in what I had left. I had just enough for a front and back, but then not enough single pieces for the sleeves. So I decided to do a small modification to the pattern, and shorten the sleeves.

Sideways glance. I’d like to say I was contemplating my sleeves, but really I was just hoping to get the photos done before the rain came.

Since the sleeve is so close-fitting, I didn’t need to alter the line at all, just mark where I’d have to cut it off. I had just enough to make elbow-length sleeves: this isn’t a length I used to like, but since we offered it as an option on the Cassandra pattern, I’ve been getting more into it, so I decided to go for that rather than “short short” sleeves.

I usually find that designers choose specific features for a reason, and I think the ¾ length sleeves of the original pattern work best with the cut, but this is definitely a cute and very wearable t-shirt of the kind that will be in heavy rotation!

and now I’m looking downwards. There are only so many ways you can photograph a sleeve…

AND, bonus make: there were just enough scraps of offcuts left to try out the latest draft of the panties pattern we’re working on!

pretty panties!

I’m in love with the combination of this floral fabric and the pale coral lace. Plus from three metres of fabric I got a maxi dress, a peplum top for my daughter, a t-shirt, and a pair of knickers. That’s pretty hard-working fabric!

My next scraps were rescued from an early version of the Cassandra dress. When we were drafting we initially put too much swing in it, and it felt sack-like (we felt we’d crossed the line from “eat, drink, be merry, and your tummy still won’t show” to “is she eating for two?”, so went back to the drafting stage!) I’d made it in one of my favourite fabrics, so was gutted when I realised that we needed to make further adjustments. I put it in my wardrobe and thought I’d get some wear out of it anyway… but it just sat there, ignored and unloved. Time to reach for the scissors…

So much better as a Ballerina top!

Now, I don’t know about you, but I always find it hard to cut pattern pieces out of existing garments, because the ones you’re cutting from are often narrower in the wrong place than you need them to be. So I carefully cut all the seams to maximise fabric usage, and managed to get the bodice front and back from the skirt part of the dress. The sleeves could be cut down for the Ballerina sleeves, as the Cassandra ones are slightly wider, and then there was a bit left at the bodice top that wasn’t going to be big enough to save.

Can you spot the difference in this version? Look at the dress version of the Ballerina top on the pattern packet: it has cuffs. Cuffs that would just squeeze into my last little bit of fabric! So I decided to go for it, and make some cuffs for the top.

Behold! Cuffs on the dress version!

Now I do like a cuff. I won’t lie to you: a big part of this is dispensing with the need to hem sleeves. I don’t know why I dislike hemming sleeves, it’s not that it’s hard or anything, but it’s as if in my head it’s harder than it is in reality. So bring on the cuffs.

Cuff love

It’s a nice new twist on a TNT pattern, especially since the pattern itself doesn’t offer a variety of options. I wonder whether it might have been better in a more casual or even contrast fabric, but I do like how it adds some length to the sleeve. Because the fabric print is quite busy, the photos don’t show it brilliantly, but I promise they’re there!

AND there was just enough fabric left from the scraps of the original dress to make… another pair of our new knickers!

Ta-daaa! Scrapbusting like a boss. Plus more pretty lace.

We’re still undecided about a name for these, hence the “nameless panties” of the title. I have a name that I’m 90% certain about, but watch this space…

Anyway, on to the final make… This was less of a desire to use up scraps and more of a rescue mission. I had this idea in my head that it would be great to hack the Dune maxi into a skirt. But you know how I’ve ignored the voice of reason before? I did it again. I cut it off at the high waist instead of the low waist, but attached a waistband that fit my low waist. So it was either too long if I wore the waistband at the right place, or too baggy if I hoiked it up. Also, you know what I said earlier about designers making choices for a reason? Dune is a great dress, because of its skimming lines. You lose the whole skim factor if you make it into a waistbanded skirt. So yes, when I started out on this one my voice of reason might as well have been screaming at me from another room while I sang my heart out wearing headphones and doing the vacuuming, because I just didn’t hear it…

Sit tight, there’s a story behind this top…

Anyway, I was left with two large pieces of navy fabric in a skirt shape. By a wing and a prayer I managed to squeeze the bodice of the Cassandra top and an elbow-length sleeve out of each piece (I’m talking to within a couple of millimetres). While I was attaching the sleeves, I noticed I was struggling to set the sleeves nicely. I thought it was strange, but I put it down to being tired and a bit fed up of my rescue project.

Well, when I came to try on the top, I could barely squeeze my arms into the sleeves.

No, I hadn’t been eating lots of spinach (OK, if you never saw Popeye, that joke just went down like a lead balloon).

Instead of the Cassandra elbow length sleeves, I’d grabbed the pattern piece for a pattern I’d been making for my 4-year-old daughter.

No, don’t ask how I could be so stupid.

My remaining pieces of fabric were even smaller now. No way even my trusty Ballerina top could fit onto those. BUT… part of it could. From about the armscye down, in fact. And I had some remnants of black cotton jersey of roughly the same weight left over from my Rise turtleneck. I managed to get the upper parts of the bodice front and back, plus a neckband, with a tiny bit left over – just big enough for short sleeves – from the black jersey. So I was going to make this a short-sleeved top, until I realised that in my offcuts from the original navy maxi skirt I had a couple of pieces big enough to make the rest of the sleeve piece. Hurray!

I’m going to pretend that this is what these fabrics were destined for all along.

The only drawback is that it’s a bit, well, Vulcan…

Live long and prosper, friends…

Till next time, have a great week!

Pin these ideas: